LNEYA Промышленные чиллеры Производитель Поставщик
Новости
Метод установки системы управления температурой нагрева и охлаждения автомобильного двигателя
In chemical and pharmaceutical, chemical laboratories, pilot plants and other industrial processes, the heating and cooling temperature control system is the most used equipment for temperature control in chemical manufacturing, so a highly dynamic temperature control system is required. When controlling the reactor temperature, exothermic and endothermic reactions must be compensated for with high speed and reliability. Selection must take into account a variety of influences and conditions....
Посмотреть детали
Какие требования предъявляются к оборудованию для контроля температуры охлаждения и нагрева 500-литровой емкости
The 500-liter reaction kettle cooling and heating temperature control equipment is a dynamic temperature control system, a fully closed circulation pipeline, which can be automatically heated or cooled according to the process requirements. 1. A series of exothermic and endothermic reactions will occur during the polymerization reaction of the 500-liter reactor with cooling, heating and temperature-controlling equipment. 2. It can control one or more reactors at the same time. It is a large s...
Посмотреть деталиHigh-low temperature control system with different configurations of high-pressure reactors
Different configurations of high pressure reactors, the quality of products brought by different manufacturers is not the same, but the points of attention are the same, you need to pay attention to it. 1. To be used at the designated location and follow the instructions for use. Check the test pressure, operating pressure, operating temperature and other conditions engraved on the main container, and use it within the allowable range of conditions. 2. The high-pressure reactor is a precision...
Посмотреть детали
Анализ работы и промышленного применения чиллера
Although there are many different types of chillers, most use the same cooling principle. An important part of the process is the coolant or refrigerant, which holds more heat than water and helps maintain an efficient cooling process. Heat is removed from the coolant and released into the air. The concept of a cooler is based on the principle that cooling involves removing heat from a process and releasing it into the air. All chillers have condensers, compressors, expansion valves and evapo...
Посмотреть детали
Где могут пригодиться промышленные циркуляционные насосы для отопления?
The industrial heating circulator can provide a circulation device of cold source and heat source, and has a wide working range. It is used in the pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors, tanks, etc., and can also be used for heating and cooling of other equipment. 1. Due to the heating and cooling effect of the industrial heating circulator, the material temperature can be kept constant (heating and cooling) during the producti...
Посмотреть детали
About the components of the reactor chiller refrigeration heating circulator
The reactor chiller refrigeration and heating circulator is used to control the heater and cooler, adjust the temperature, and maintain the stable temperature of the material. Through the circulating medium, the temperature of the material can be quickly controlled to further improve the efficiency of the product, so that it can be transported to the cooling equipment normally. Refrigerant, and can make the refrigerant form a continuous circulation loop in the system, so as to reduce the temp...
Посмотреть детали
Каковы области применения паровых циркуляторов в химической промышленности?
The steam circulator in the chemical industry is a temperature control equipment in the pharmaceutical and chemical industry. When users operate, they need to understand the performance and maintenance knowledge in order to operate the equipment effectively. 1. It can be heated and cooled quickly, can move up and down continuously, and has a wide temperature control range. It does not need to replace the heat transfer medium in the whole process, and reduces the consumption of heat transfer m...
Посмотреть детали
Причина сигнализации высокого давления встроенного блока управления температурой TCU
When the TCU integrated temperature control unit is used, it needs to be used according to the instructions in detail. Once problems are encountered, they need to be dealt with in time. Generally speaking, if we encounter a high pressure alarm from the compressor, then we need to carefully analyze various reasons. The reasons include more refrigerant filling, poor condensation effect, electrical failure and many other reasons. So, how should it be handled? 1. There is a lot of refrigerant fi...
Посмотреть детали
Каков контроль температуры в реакторе?
The reactor cooling system is one of the common equipment in the chemical industry. It can not only heat but also refrigerate to meet the needs of heating and cooling in the reaction process. There are usually three ways to control the temperature of laboratory reactors:1. Manual control: Manually operate the knob on the front of the reactor controller.2. Control by PC: The PC and the controller are connected by a network cable, and the operation is carried out on the PC.3. Controlled by th...
Посмотреть деталиВ различных реакторах и материалах используется система температурного контроля PLC
The PLC temperature control system is used for the lifting and constant temperature control of glass reactors, metal reactors and bioreactors, especially for heat exothermic control in the reaction process. The heat transfer oil in the jacket of the reactor is heated, and the heat energy is indirectly transferred to the heating kettle in the material, so as to control the heating temperature of the reaction material. The industrial temperature control technology of the equipment has the advan...
Посмотреть детали
