Temperature Forcing System/ Thermal Stream Head

Система форсирования температуры/машина для испытания на ударную вязкость

AES -115℃~225℃

Газовые охлаждающие чиллеры Охладители для испытаний полупроводников

Time switching10s~20s
ХладагентR404A/R23/R14/R508B
Охлаждающая вода0.6m³/h~3m³/h
Диапазон мощности3,7 кВт ~ 7,5 кВт

система охлаждения при реактивном ударе система температурного форсирования Термальный поток

ИНКВИЗИЦИЯ

TEMP SHOCK TEST AIRFLOW HOOD

Thermal Solutions for ATE testing

1/CHARACTERISTIC ANALYSIS

2/LOOP TEST

3/IMPACT TEST

4/FAILURE ANALYSIS

Suitable for IC testing of all kinds of semiconductor chips,flash memory Flash/EMMC, PCB circuit boards, opticalcommunications,electronic industries, etc.

AES series for Automatic test equipment in semiconductor, aerospace, military and other industries. Such as ATE is used to measure the output signal of semiconductor devices，Used to evaluate the properties and performance of DUT, UUT, EUT to ensure use.

Параметры

Модель	AES-4535	AES-6035	AES-8035	AES-A1035W	AES-A1235W
	AES-4535W	AES-6035W	AES-8035W
Температура. Диапазон	-45℃～225℃	-60℃～225℃	-80℃～225℃	-100℃～225℃	-120℃～225℃
Мощность нагрева	3,5 кВт	3,5 кВт	3,5 кВт	4,5 кВт	4,5 кВт
Temp. Control Accuracy	±0.5℃	±0.5℃	±0.5℃	±0.5℃	±0.5℃
Temp. Conversion Time	-25℃ to 150℃ Approximately 10S 150℃ to -25℃ Approximately 20s	-45℃ to 150℃ Approximately 10S 150℃to -45℃ Approximately 20s	-55℃ to 150℃ Approximately 10S 150℃to -55℃ Approximately 15s	-70℃ to 150℃ Approximately 10S 150 ℃to -70℃ Approximately 20s	-80℃ to 150℃ Approximately 11S 150℃to -80℃ Approximately 20s
Air Requirement	Air Cleaner<5um
	Air Oil Content:<0.1ppm
	Air Temp&Humidity：5℃～32℃ 0～50%RH
Air Handing Capacity	7m3/h ～ 25m3/h Pressure 5bar～7.6bar
System Pressure Dispiay	Давление в холодильной системе определяется с помощью манометра (высокое давление, низкое давление);
	Давление в системе кровообращения определяется датчиком давления и отображается на сенсорном экране.
Контроллер	Siemens PLC, Fuzzy PID Control algorithm.
Темп. Контроль	Control of outlet temperature
Программируемый	Можно разработать 5 процедур, и каждая программа может состоять из 40 шагов
Протокол общения	Ethernet Interface TCP/IP Protocol.
Internal Temp. Feedback	Equipment outlet temperature, refrigeration system condensation temperature, ambient temperature, compressor suction temperature, cooling water temperature (water cooling equipment is configured) .
Temp. Feedback	T Temperature Sensor
Компрессионный двигатель	Taikang,France	Taikang,France	Taikang,France	Italy Duling	Italy Duling
Испаритель	Double-pipe (heat) Exchanger
Calorifier	Flanged Barrel Heater
Аксессуары для холодильного оборудования	Danfoss / Emerson fittings (dry filters, oil separators, high and low pressure protectors, expansion valves, solenoid valves).
Панель управления	Цветной сенсорный экран LNEYA с диагональю 7 дюймов, отображение температурных кривых\ экспорт данных EXCEL
Безопасная охрана	С функцией самодиагностики; выключатель последовательности фаз, защита от перегрузки морозильника; реле высокого напряжения, реле перегрузки, устройство тепловой защиты и другие защитные функции.
Криоген	Topsubmixed Refrigerant
External Insulation Hose	8m DN32 fast coupling clamp for easy outgoing insulation hose
Хладагент	R404A	R404A/R23	R404A/R508B	R404A/R23/R14	R404A/R23/R14
Shape Dimension (Wind)cm	5469132	5469132	7573133	80120185	100150185
Shape Size (Water)cm	5469132	5469132	7573133	70100175	80120185
Air-Cooled Type	Copper tube aluminum fin condensation mode, upper and out type, condensing fan using Germany EBM axial flow fan.
Water-Cooled Type W	Тип W имеет водяное охлаждение
Water-Cooled Condenser	Sleeve type heat exchanger (Paris/ Shen’s)
Cooling Water Quantity At 25℃	0.6m3/h	1.2m3/h	1.6m3/h	2.6m3/h	3 м3/ч
Источник 380V 50HZ	3.7kW max	5 кВт макс.	5 кВт макс.	6.8kW max	7,5 кВт макс.
Источник	Настраиваемые 460В 60HZN 220В 60HZ трехфазные
Материал корпуса	Cold rolled sheet spray (Standard Colour 7035).
Temp. Spread	High Temperature To +300℃

Descriptions

The output airflow cover of the testing machine will be covered bythe test product to form a test chamber with a relatively closedspace. The high or low temp airflow output by the testing machinewill cause the surface temp of the test product to change drastically,thus completing the corresponding high and low temp impact test.

It can isolate one lC or original component among many componentsand separately perform high and low tempimpact withoutaffecting other surrounding devices. Compared with the traditionalthermal shock test box, the temp impact rate is faster.

Provides accurate and fast ambient temperature (-120 °C ~ +300 °C) for chips, modules, integrated circuit boards, and electronic components. It is an indispensable instrument for product electrical performance testing, failure analysis, and reliability assessment.

Widely used in semiconductor companies, aerospace, optical communications, universities, research institutes and other fields.

Compared to the traditional thermostat, there are several features:
Temperature range: -120 °C ~ +300 °C;
The temperature rise and fall is very fast, -55 °C ~ 150 °C < 10 seconds;
Temperature control accuracy: ±1 °C;
Temperature setting capability: ±0.1 °C;
Temperature display capability: ±0.1 °C;
Maximum air flow: 25m3/h;
Real-time monitoring of the real temperature of the IC under test to achieve closed-loop feedback and adjust the gas temperature in real time;
The temperature rise and fall time is controllable, programmable operation, manual operation and remote control.