Semiconductor refrigeration temperature control table cooler operation instructions
The power supply switching of the control system of the transformer cooling system of the semiconductor refrigeration temperature control station uses the imported dual power automatic switching device. Its main function is automatic switching between the active and standby working power sources. When the common power failure occurs, it automatically switches to the standby power supply. When both power supplies are normal, the common power supply works and the standby power supply is in standby state. The semiconductor refrigeration temperature control station programmable controller (PLC) is the control center of the execution part of the strong oil air cooler control device. It receives various status signals from the transformer to control the execution part.
When the transformer of the semiconductor refrigeration temperature control console is put into operation, a group of coolers will be put into operation, that is, the working group cooler is operated. The auxiliary cooler is controlled according to the oil surface temperature of the transformer, the winding temperature, the load signal, etc., and the auxiliary cooler can be activated as follows. The cooling method of the semiconductor refrigeration temperature control transformer is forced oil circulation air cooling, and at least one group of coolers should be operated after the transformer is put into operation. The control box of the semiconductor refrigeration temperature control station is controlled by intelligent equipment, and the cooling device for controlling the transformer is mainly controlled by a main switch such as a change switch on the control panel.

The structure and operation description of the semiconductor refrigeration temperature control station are as shown above. When the user operates the semiconductor refrigeration temperature control station, the operating efficiency of each component is ensured as much as possible, so that the overall operating efficiency of the semiconductor refrigeration temperature control station can be improved.
Похожие рекомендации
-
Rotary shaft freezing process in new energy automobile motor assembly
1241As the market for new energy vehicles has gradually expanded, the new energy motor manufacturing industry has also grown. Then, for the motor manufacturer, the rotor into the core process during the motor assembly process is particularly important...
Посмотреть детали -
Where do you need low temperature chiller and introduction
909Even though water is one of the most precious and scarce resources, it is still used as a coolant in many laboratories. Unfortunately, most of the water used as a coolant is not recycled, resulting in higher and higher laboratory costs and wasted ...
Посмотреть детали -
LNEYA ultra-low temperature cold box power supply+electronic control instrument system description
1187LNEYA ultra-low temperature cold box needs to be tested after a long time of use. What should be paid attention to when the power supply and electronic control instrument system are inspecting? LNEYA ultra-low temperature cold box power supply and...
Посмотреть детали -
Охладитель для дистилляционного чайника объемом 200 л
795Охладитель для 200-литрового дистилляционного чайника должен одновременно выполнять две основные функции: конденсировать пары метанола и охлаждать материал в процессе реакции. ...
Посмотреть детали